Rheem Commercial Value Series Package Gas Electric Unit

  • RKKN-B Standard Efficiency Series
  • ASHRAE 90.1-2010 Compliant Models/li>
  • Unit of Measure

    Voltage

    N/A 575 V

    Number of Phases

    N/A 3

    Frequency

    N/A 60 Hz

    Drive Package

    N/A Belt Drive

    Gross Cooling Capacity

    N/A 70000 Btu

    EER

    N/A 11

    IEER

    N/A 12.9

    Nominal CFM

    N/A 2400 ft³/min

    AHRI Rated CFM

    N/A 2100 ft³/min

    AHRI Net Cooling Capacity

    N/A 68000 Btu

    Net Sensible Cooling Capacity

    N/A 46000 Btu

    Net Latent Cooling Capacity

    N/A 22000 Btu

    Net System Power

    N/A 6.18 kW

    Outdoor Sound Rating

    N/A 83 dB

    Recommended Size

    N/A 2 x 16 x 16 in

    Refrigerant Charge

    N/A 1899 g67 oz

    Weight

    N/A 613 lb

    Shipping Weight

    N/A 646 lb

    Heating Input

    N/A 100000 Btu

    Heating Output

    N/A 82000 Btu

    Temperature Rise Range

    N/A 20 to 50 ºF

    Steady State Efficiency

    N/A 82 %

    No. Burners

    N/A 5

    No. Stages

    N/A 1

    Gas Connection Pipe

    N/A 0.5 in

    Type

    N/A Two-Stage Scroll

    No. Stages

    N/A 1

    Fin Type

    N/A Louvered

    Tube Type

    N/A MicroChannel

    MicroChannel Depth

    N/A 0.71 in

    Face Area

    N/A 16.4 ft²

    Rows

    N/A 1

    FPI

    N/A 23

    Fin Type

    N/A Louvered

    Tube Type

    N/A MicroChannel

    MicroChannel Depth

    N/A 1.26 in

    Face Area

    N/A 5.95 ft²

    Rows

    N/A 1

    FPI

    N/A 22

    Refrigerant Control

    N/A TX Valve

    Drain Connection No.

    N/A 1

    Drain Connection Size

    N/A 0.75 in

    Type

    N/A Propeller

    No. Used

    N/A 1

    Diameter

    N/A 24 in

    Drive Type

    N/A Direct

    No. Speeds

    N/A 1

    CFM

    N/A 4200 ft³/min

    No. Motors

    N/A 1

    Horsepower

    N/A 0.5 hp

    Motor RPM

    N/A 1075

    Type

    N/A FC Centrifugal

    No. Used

    N/A 1

    Diameter

    N/A 11 x 10 in

    Drive Type

    N/A Belt (Adjustable)

    No. Speeds

    N/A Single

    No. Motors

    N/A 1

    Horsepower

    N/A 1.5 hp

    Motor RPM

    N/A 1725

    Motor Frame Size

    N/A 56 in

    Type

    N/A Disposable

    Furnished

    N/A Yes

    No. Filters

    N/A 4

    Depth

    N/A 48 1/16 in

    Width

    N/A 82 1/4 in

    Height

    N/A 35 in

    N/A

    • R-410A HFC refrigerant.
    • Complete factory charged, wired and run tested.
    • Scroll compressors with internal line break overload and high-pressure protection.
    • Two-stage compressor on all models.
    • Convertible airflow.
    • TXV refrigerant metering system.
    • High Pressure and Low Pressure/Loss of charge protection standard on all models.
    • Solid Core liquid line filter drier.
    • Single slab evaporator coil facilitate easy cleaning for maintained high efficiencies.
    • Cooling operation up to 125 degree F ambient.
    • Easily removable filter, blower, gas heat, and compressor/ control access panels permits prompt service.
    • One piece top cover and one piece base pan with drawn supply and return opening for superior water management.
    • Externally mounted refrigerant gauge ports for easy service diagnostics.
    • Easy to install plug-in; slip in, 100% fully modulating economizer.
    • 82% of steady state efficiency
    • Forkable base rails for easy handling and lifting.
    • Single point electrical and gas connections.
    • High performance belt drive motor with variable pitch pulleys and quick adjust belt system.
    • Permanently lubricated evaporator, condenser and gas heat inducer motors.
    • Condenser motor is internally protected, totally enclosed with shaft down design.
    • 2 inch filter standard with slide out design.
    • Single stage gas valve, direct spark ignition, and induced draft for efficiency and reliability.
    • Tubular heat exchange for long life and induced draft for efficiency and reliability.
    • Solid state furnace control with on board diagnostics.
    • Colored and labeled wiring.
    • Micro Channel coils.
    • Molded compressor plug.
    • Micro Channel evaporators and condenser delivers superior performance with less refrigerant charge and less weight than conventional copper tube/aluminum fin coils In addition the aluminum design has superior formicary corrosion protection and less potential for leaks due to elimination of tube rubbing potential. Its easier to clean and has a more robust surface.