Request Information
Unit of Measure

Gross Cooling Capacity

 N/A 36200 Btu

EER

 N/A 11.6

SEER

 N/A 14

Nominal CFM

 N/A 1200 ft³/min

AHRI Rated CFM

 N/A 1250 ft³/min

AHRI Net Cooling Capacity

 N/A 34600 Btu

Net Sensible Cooling Capacity

 N/A 25300 Btu

Net Latent Cooling Capacity

 N/A 9300 Btu

Net System Power

 N/A 2.95 kW

AFUE

 N/A 81 %

Refrigerant Charge

 N/A 1531 g54 oz

Outdoor Sound Rating

 N/A 78 dB

Voltage

 N/A 480 V

Frequency

 N/A 60 Hz

Number of Phases

 N/A 3

Weight

 N/A 527 lb

Shipping Weight

 N/A 534 lb

Heating Input

 N/A 80000 Btu

Heating Output

 N/A 64800 Btu

Temperature Rise Range

 N/A 25 to 55 ºF

Steady State Efficiency

 N/A 82 %

No. Burners

 N/A 4

No. Stages

 N/A 1

Gas Connection Pipe

 N/A 0.5 in

Compressor Type

 N/A Single-Stage Scroll

Fin Type

 N/A Louvered

Tube Type

 N/A MicroChannel

MicroChannel Depth

 N/A 0.7 in

Face Area

 N/A 13.9 ft²

Rows

 N/A 1

FPI

 N/A 23

Fin Type

 N/A Louvered

Tube Type

 N/A MicroChannel

MicroChannel Depth

 N/A 1 in

Face Area

 N/A 4.8 ft²

Rows

 N/A 1

FPI

 N/A 20

Refrigerant Control

 N/A TX Valves

Drain Connection No.

 N/A 1

Drain Connection Size

 N/A 0.75 in

Type

 N/A Propeller

No. Used

 N/A 1

Diameter

 N/A 24 in

Drive Type

 N/A Direct

No. Speeds

 N/A 1

CFM

 N/A 3680 ft³/min

No. Motors

 N/A 1

Horsepower

 N/A 1/3 hp

Motor RPM

 N/A 1075

Type

 N/A FC Centrifugal

No. Used

 N/A 1

Diameter

 N/A 10 x 10 in

Drive Type

 N/A Belt (Adjustable)

No. Speeds

 N/A Single

No. Motors

 N/A 1

Horsepower

 N/A 1/2 hp

Motor RPM

 N/A 1725

Motor Frame Size

 N/A 48 in

Type

 N/A Disposable

Furnished

 N/A Yes

No. Filters

 N/A 2

Recommended Size

 N/A 1 x 16 x 25 in

Depth

 N/A 48 1/16 in

Width

 N/A 76 1/4 in

Height

 N/A 35 in

N/A

  • R-410A HFC refrigerant.
  • Complete factory charged, wired and run tested.
  • Scroll compressors with internal line break overload and high-pressure protection.
  • Single stage compressor on all models (except RKQN-A060 two stage Ultra Tech).
  • Convertible airflow.
  • TXV refrigerant metering system on each circuit.
  • High Pressure and Low Pressure/Loss of charge protection standard on all models.
  • Solid Core liquid line filter drier on each circuit.
  • Single slab, Micro Channel designed evaporator coil facilitate easy cleaning for maintained high efficiencies.
  • Cooling operation up to 125 degree F ambient.
  • Easily removable filter, blower, gas heat, and compressor/ control access panels permits prompt service.
  • One piece top cover and one piece base pan with drawn supply and return opening for superior water management.
  • Externally mounted refrigerant gauge ports for easy service diagnostics.
  • Easy to install plug-in; slip in, 100% fully modulating economizer.
  • Forkable base rails for easy handling and lifting.
  • Single point electrical and gas connections.
  • Direct drive or high performance belt drive motor with variable pitch pulleys and quick adjust belt system.
  • Permanently lubricated evaporator, condenser and gas heat inducer motors.
  • Condenser motors are internally protected, totally enclosed with shaft down design.
  • 1 inch filter standard with slide out design. Will accept 2 inch filter.
  • Single stage gas valve, direct spark ignition, and induced draft for efficiency and reliability.
  • Improved Gas Heating Efficiency (AFUE: 81%).
  • Tubular heat exchange for long life and induced draft for efficiency and reliability.
  • Solid state furnace control with on board diagnostics.
  • Colored and labeled wiring.
  • Molded compressor plug.
  • Through the base gas and electric.
  • Micro Channel evaporators and condenser delivers superior performance with less refrigerant charge and less weight than conventional copper tube/aluminum fin coils. In addition the all aluminum design has superior formicary corrosion protection and less potential for leaks due to elimination of tube rubbing potential. Its easier to clean and has a more robust surface.