Unit of Measure

Gross Cooling Capacity

N/A 38500 Btu

EER

N/A 12

SEER

N/A 14

HSPF

N/A 8

Nominal CFM

N/A 1200 ft³/min

AHRI Rated CFM

N/A 1200 ft³/min

AHRI Net Cooling Capacity

N/A 36800 Btu

Net Sensible Cooling Capacity

N/A 27200 Btu

Net Latent Cooling Capacity

N/A 9600 Btu

Net System Power

N/A 2.99 kW

Heating Temperature

N/A 33600 Btu/hr

Low Temperature

N/A 19400 Btu/hr

Heating Temperature - System Power

N/A 2.79 kW

Low Temperature - System Power

N/A 2.56 kW

Compressor Type

N/A Single-Stage Scroll

Outdoor Sound Rating

N/A 83 dB

Voltage

N/A 480 V

Frequency

N/A 60 Hz

Number of Phases

N/A 3

Refrigerant Charge

N/A 3289 g116 oz

Weight

N/A 517 lb

Shipping Weight

N/A 532 lb

Fin Type

N/A Louvered

Tube Type

N/A Rifled

Tube Size

N/A 0.375 in

Face Area

N/A 16.89 ft²

Rows

N/A 1

FPI

N/A 22

Refrigerant Control

N/A TX Valves

Fin Type

N/A Louvered

Tube Type

N/A Rifled

Tube Size

N/A 0.375 in

Face Area

N/A 16.56 ft²

Rows

N/A 4

FPI

N/A 13

Refrigerant Control

N/A TX Valves

Drain Connection No.

N/A 1

Drain Connection Size

N/A 1 in

Type

N/A Propeller

No. Used

N/A 1

Diameter

N/A 24 in

Drive Type

N/A Direct

No. Speeds

N/A 1

CFM

N/A 4000 ft³/min

No. Motors

N/A 1

Horsepower

N/A 1/2 hp

Motor RPM

N/A 1075

Type

N/A FC Centrifugal

No. Used

N/A 1

Diameter

N/A 10 x 10 in

Drive Type

N/A Belt

No. Speeds

N/A Variable

No. Motors

N/A 1

Horsepower

N/A 1/2 hp

Motor RPM

N/A 1725

Motor Frame Size

N/A 56 in

Type

N/A Disposable

Furnished

N/A Yes

No. Filters

N/A 2

Recommended Size

N/A 1 x 25 x 16 in

Depth

N/A 48 1/16 in

Width

N/A 76 1/4 in

Height

N/A 35 in

N/A

  • R-410A HFC refrigerant.
  • Complete factory charged, wired and run tested.
  • Scroll compressors with internal line break overload and highpressure protection.
  • Single stage compressor on all models.
  • Convertible airflow.
  • TXV refrigerant metering system on each circuit.
  • High Pressure protection standard on all models. Low Pressure/Loss of charge protection standard on all models.
  • Solid Core liquid line filter drier on each circuit.
  • Single slab, single pass designed evaporator coil facilitate easy cleaning for maintained high efficiencies.
  • Cooling operation up to 125 degree F ambient.
  • Easy access to filter, blower, electric heat, and compressor/ control compartments permit prompt service.
  • Powder Paint Finish meets ASTMB117 steel coated on each side for maximum protection. G90 galvanized.
  • One piece top cover and one piece base pan with drawn supply and return opening for superior water management.
  • Externally mounted refrigerant gauge ports for easy service diagnostics.
  • Easy to install plug-in; slip in, 100% fully modulating economizer with barometric relief.
  • Forkable base rails for easy handling and lifting.
  • Single point electrical connection.
  • High performance belt drive motor with variable pitch pulleys and quick adjust belt system.
  • Permanently lubricated evaporator and condenser motors.
  • Condenser motors are internally protected, totally enclosed with shaft down design.
  • 1 inch filter standard with slide out design.
  • Colored and labeled wiring.
  • Copper tube/Aluminum Fin coils.
  • Molded compressor plug.
  • Supplemental electric heat provides 100% efficient heating.
  • Factory installed ClearControl™, a Direct Digital Control (DDC) and sensors which can connect to LonWorks™ or BACnet BAS systems for remote monitoring and control.